Handheld Thermometer Model HR series

List of specifications

Model

HR-1100
HR-1150
HR-1650

HR-1200
HR-1250
HR-1750		HR-1300
HR-1350		HR-1301
HR-1351		HR-1400
HR-1450		HR-1500
HR-1550
DisplayLCD LEDLCD 
Waterproof specifications/Equivalent to IPX5〇〇--〇-
Input connectorASP model：HR-1*0* /ANP model：HR-1*5*
Input typeThermocouple Input: Type E, K　(Not switchable)
Channel1ch
Signal source resistanceMAX.1 Kohm
Measurement Range1°C ResolutionE-200～800°C
K-200～1370°C
0.1°C ResolutionE-104.9～504.9°C(Switches automatically to 1°C resolution range when messured temperatures fall outside the 0.1°C resolution range.)
K-104.9～504.9°C(Switches automatically to 1°C resolution range when messured temperatures fall outside the 0.1°C resolution range.)
Measurement Accuracy1°C Resolution0°C~±(0.1% of reading +1°C)
~0°C±(0.5% of reading +1°C)
0.1°C Resolution0°C~±(0.05% of reading + 0.2°C)
~0°C±(0.15% of reading + 0.2°C)
Reference junction compensation accuracy±0.2°C at 25°C±10°C 

Temperature Coefficient*1

±0.02×Δt°C (Add the value obtained by multiplying the excess temp.Δt[°C] by a coefficient to the total accuracy. e.g. ±0.3°C is added at room temp. of 0°C or 50°C)
Operation Environment0 to 50°C, 0 to 80%RH (Non condensing)
Storage Environment-20 to 50°C, 0 to 85%RH (Non condensing)
Battery lifeapprox.900happrox.900happrox.600happrox.20h*2approx.300happrox.550h
Power supply(Dry battery)4 AA Alkaline batteries
Power supply(AC power)--

available

-available
Sampling rateapprox.200ms
LinearlizerDigital Linearizer method (Compliant with IEC 60584-1 (2013))
Dimensions(mm)approx. 82(w)×166(H)×36(D)  [Protruded parts excluded]
Weightapprox. 350g [Include Batteries]
Supplied accessoriesManual,Test report,Soft case, Hand strap,4 AA Alkaline batteries
Optional accessories--Alarm output cable-Communication cable,software
 Analog output cable--
Alarm Output--

〇TABLE1

〇TABLE1-

‐

Analog Output---〇TABLE2

‐

‐

Memory function-----〇TABLE3
Compatible standards(CE)EMC：EN61326-1：2013, EN 61326-2-1：2013 classA Table2（ Industrial）

RoHS：IEC EN 63000：2018

*1 Only when the temp. exceeds 25°C ±10°C
*2 Approx. 400h when the analog output is switched always off.

*2 Details of typeJ,T,R

TABLE1 Alarm Output : HR-13:0, HR-13*1

Output PatternUpper LimitLower Limit
More than upper limitCloseOpen
Between upper and lower limitOpenOpen
Less than lower limitOpenClose
Alarm output cableANGHA-1.5(accessory)

※ The alarm output uses a photo MOS relay. ON resistance（internal protection resistance 400Ω, photo MOS relay ON resistance 50Ω） Drive voltage MAX.25V

TABLE2 Analog output : HR-1301,HR-1351

Rate1ｍV/°C(1°C resolution)10ｍV/°C(0.1°Cresolution)
RangeThe entire measurement range with 1°C resolution

The entire measurement range with 0.1°C resolution

Analog output conversion accuracy(under 25°C±10°C)Equivalent to the value obtained by adding ±1°C(1mV)to the measurement accuracyEquivalent to the value obtained by adding ±0.1°C(1mV)to the measurement accuracy

Temperature conficient*1

±(0.1ｍV/°C×Δt°C)
e.g.±1.5ｍV(2°C) is added at room temp.of
　　0°C or 50°C 		±(0.1ｍV/°C×Δt°C)
e.g.±1.5ｍV(0.2°C) is added at room temp.of
　　0°C or 50°C 
When the probe is disconnectedApprox.-2.3V
Measurement range+overApprox.5.1V
Measurement range-overApprox.-2.2V
Insulation resistance100MΩ/DC500V(between input and analog output)
Withstand voltage300Vpｰp(between input and analog output)
CableANGHA-1.5(accessory)

＊1 When the temperature exceeds 25°C±10°C ,multiply the excess temperature Δt°C by a coefficient and add it to the analog output conversion accuracy.
※Regarding analog output: The displayed value is D/A converted and output.The update timing is about 200ms, and the output resolution isin 1mV units.When not using the analog output, turn off the analog output.

TABLE3 Memory function : HR-1500, HR-1550

Time intervalsecond:1, 5, 10, 30 minutes:1, 5, 10, 30, 60 and manual memory
Memory capacity19999data

Close the window