・Waterproof specifications
Protect from water
Waterproof specifications：Equivalent to IPX5

・Display
Large display and easy to read
Large easy-to-read LCD display.

・Auto power-off
Prevent forgetting to turn off the power
Thermometer will turn the power off automatically after 5minutes.

・Hold
Fixed display of indicated value
The displayed value can be fixed by the 【Hold】key.

・P/V hold
Prevent oversight of measurements during work
The peak (Max.) value can be displayed by the 【P/V HOLD】key on the sub display.

・Resolution change
Also displays small changes in value
Press the 【RESO】key, the resolution of the indicated value can be switched to 1°C or 0.1°C.

・Calibration
Correct the displayed value
The displayed value can be adjusted by the 【CAL】key.

・Alarm output
Notified when the measurement value is out of the set temp. range
The thermometer gives an alarm when readings go beyond the high or low limits.

・Analog output
Converts the value to voltage and outputs it to another device
Use an insulation system. Analog output ON(output rate 1mV/°C or 10mV/°C)・Analog output OFF can be switched by key operation.
1mV/°C : Output 1mV for 1°C in conjunction with the indicated value.
10mV/°C : Output 1mV for 0.1°C in conjunction with the indicated value.

・°C / °F change

Press the 【°C / °F】key to change the temperature unit of the displayed temperature

・Memory function
Record measurement results and transfer data to PC
Stores reading at user-selected time intervals. User specified time interval and the remaining amount of memory are displayed on the sub display.
The playback function allows you to check data stored in memory.
You can graph and from the recorded data on your PC by using attached software. It is also possible to convert the recorded data to CSV format.