ANRITSU METER CO.,LTD
 
 
 
How to order of U series
 
How to order of U series
How to order of U series
number 1 Head size 1 25×32mm (Guard:U-*1*)
37×36mm(Wheel:U-*2*, U-*3*)
2 29×60mm (Guard:U-*1*)
40×66mm(Wheel:U-*2*, U-*3*)
number 2 Guard Material
(Max. Temp.)
1 Teflon guard(250°C)
2 Bearing wheel (200°C)
3 Teflon wheel (250°C)
1 to 3 : Contact section is polyimide-coated.
4 Teflon guard (200°C)
5 Bearing wheel (200°C)
6 Teflon wheel (200°C)
4 to 6 : Contact section is Teflon-coated.
7 Teflon guard (250°C)
8 Bearing wheel (200°C)
9 Teflon wheel (250°C)
7 to 9 : Contact section has no coating.
number 3 Pipe Angle 1 Straight
2 45 degrees
3 90 degrees
4 90 degrees (elbow)
5 45 degrees *
6 90 degrees *
7 90 degrees (elbow) *
8 Direct
9 Direct *
* element direction of right angle
number 4 Thermocouple K Chromel-Alumel
E Chromel-Constantan
number 5 Pipe length 00 30mm *1
01 100mm
02 200mm
03 300mm
04 400mm
05 500mm
number 6 Guard Form D0 to D4 : See right
number 7 Grip type 0 No Grip *2
1 Standard Grip
number 8 Cable type
see cable page
TC  
number 9 Cable Length 1 1000mm
1.5 1500mm
2 2000mm
2.5 2500mm
……
number 10 Plug
see plug page
ANP  
ASP  
W  
*1 No-grip type probes will not be available.
*2 For the no-grip types, choose a pipe length of 100mm or longer.
number1Head Sizenumber2Guard Material

You can choose head size as below.

head size, Guard Material
number3Pipe Angle

You can choose Pipe Angle as below.

Pipe Angle
* U-**8 and U-**9 are only available with Teflon guard head form (U-*1*, U-*4* or U-*7*).
number5Pipe Length

Pipe length means each L.

Pipe Length
number6Guard Form
  U-11*
U-14*
U-17*
U-21*
U-24*
U-27*
U-*2*, U-*3*
U-*5*, U-*6*
U-*8*, U-*9*
D0 φ300 to flat φ400 to flat flat only *
D1 - φ300 to 420
D2 φ160 to 320 φ160 to 320
D3 φ100 to 200 φ100 to 200
D4 φ60 to 120 φ60 to 120
* U-1** can be used for diameters of up toφ300mm in case of the D0 model.
* U-2** can be used for diameters of up toφ400mm in case of the D0 model.
number7Grip Type

U-211K-01-0-TC1-W (No Grip)

No Grip For device, system, auto-machines,mechanical system etc
Standard For handheld measurement
Specifications
Tolerance ±2.5°C (at 100°C surface)
Response time U-1** : 2.0 s
U-2** : 3.5 s
Durability rank A
Speed limit U-1** : 400m / min
U-2** : 600m / min
Tolerance
* : Number
■ : Thermocouple type K or E
t : Measured temperature
U-11*■ / U-13*■ / U-17*■ / U-19*■
U-21*■ / U-23*■ / U-27*■ / U-29*■
Temperature range Tolerance (Surface)
0°C ≦ t ≦ 200°C ±2.5°C
200°C < t ≦ 250°C ±3.0°C
U-12*■ / U-14*■ / U-15*■ / U-16*■ / U-18*■
U-22*■ / U-24*■ / U-25*■ / U-26*■ / U-28*■
Temperature range Tolerance (Surface)
0°C ≦ t ≦ 200°C ±2.5°C